Nissan Maxima Roof Rack Installation And Review Videos

Rhino Rack Roof Rack Review - 2017 Nissan Maxima- Video

Today on our 2017 Nissan Maxima we're going to be taking a look at the Rhino Rack Roof Rack System, and that's going to consist of the Rhino Rack Vortex Aero Crossbars, part number RRVA126B-2. The Rhino Rack 2500 Series Legs, part number RRRLKVA, and the Fit Kit for the Rhino Rack Roof Legs, part number DK133. Now these bars are made of aluminum, so they're light weight and they're going to resist rust and corrosion, as well as having this weather stripping here, which is going to reduce wind noise and drag. Now these bars are 49" long. They have a 165 pound capacity, make sure you check with your manufacturer's weight rating on your roof to make sure your roof can handle that. The weather stripping also helps prevent dirt and debris from getting into the track, which will be great for adding any of your favorite accessories. It also provides a nice slip resistant surface for your cargo basket or any other cargo you may have attached. Now we already have half of our crossbar set up, and we'll go ahead and go to the other side and I'll show you how to put it together. more

2/2/2017 1:42:05 PM

Rhino Rack Roof Rack Review - 2014 Nissan Maxima- Video

Today on our 2014 Nissan Maxima, we're doing a test fit of the Rhino Rack Vortex Arrow Crossbars. Part number for our crossbars here is RRVA118B-2. For the footpack we're using, it's RRRLKVA and for the fit kit down here, part number is going to be DK171, and that fit kit is designed to work with these Maximas. We've already got our front crossbar on. I've got one of our footpack and fit kits installed on this one. We're going to show you how to do the other one and then put the back crossbar on. The first thing we want to do is take our footpack here and our rubber piece. more

12/3/2015 3:09:57 PM

Inno Roof Rack Review - 2014 Nissan Maxima- Video

Today on our 2014 Nissan Maxima, we're doing test-fit of the Inno Square Bars, the part number for the Square Bars is INB127. For the foot pack that we're using with it, is INSU-K5, and for the Fit Kit that is designed for the Maxima, is INK583. We've already got our front crossbar in place and loaded up, we've got our feet on, we're going to show you how we put the Fit Kit onto the foot pack. To slide our foot packs on, we just pull down on the bolt here and they just slide into place onto the bar. We're going to take our rubber pad first and simply place that on the bottom with the ridge facing inside, so the fatter side towards the inside of the foot pack, or the crossbar. Next we'll take our Fit Kit clamp, and we'll just hold that in place. We'll take our two locking pieces, set those in place, and use the lock to tighten that down. more

12/3/2015 3:09:33 PM